QA QuestionsCategory: Camera Question2010-vw-cc-flip-camera
Nick asked 10 months ago

Hi, I have a 2010 VW CC with a RCD330 plus (187b noname) installed. I would like to install a backup camera but wasn\’t sure how easy it would be to install as I\’ve seen some comments about needing a converter/programming, etc. If I purchase the Flip Camera from you, will this just be plug and play or will I need to get some other equipment? Thanks!

1 Answers
ddren Staff answered 9 months ago

Hello there.
You first need to confirm whether your unit has activated the backup camera function. If it is not activated, you need to use VCDS to activate the backup camera.
The installation of the flip camera is actually very simple. Don’t hide all cables when you install. Complete all the connections first, and then hide the cables after testing without problems. Each wire is labeled. ACC 12V and BAT 12V are connected to the fuse box, and the two ground wires are connected to the screws. The reversing light wire is connected to the reversing light, and the other plugs can be directly connected. I have done further processing to make each wire very easy to be connected.