Dynamic Parking Guideline Adjustment Instructions
(Applicable to 3 Reversing Cameras with Adjustable Guidelines Sold in Our Store)
Correct Adjustment Process
(For Flip-Style Emblem Cameras on Vehicles like VW Beetle, fix “pointing to sky” issues)
1, Start the engine.
2, Turn steering all the way to left, and hold it, preventing it from bouncing back.
3, Shift from Park to Neutral and then from Neutral to Reverse 6 times or until the dynamic yellow lines go straight (make sure the camera comes on the first time you shift from Neutral to Reverse and it should remain on when you shift 5 more times)
4, Then push the (right sginal up raises the line / left signal down lowers the line) and make sure you don’t push the signal all the way(up/down) so it remains on, you just push it half until it flashes 3 times, wait for 2-4 seconds and push it again, repeat it until you reach the desired position.
5 Press the hazard light button (red triangle button) to save the setting and come out of the programming mode.
And while doing this from start to end my hand brakes were on and foot brakes were on and steering was all the way to left.
For best results, test in a marked parking space after adjustment. 🚗🔧
Leave a Reply